Toro Greensmaster 3150 Service Manual page 146

Specifications
Height- -of- -Cut : 3/16 (0.1875) in. to 11/16 (0.6875) in.
Clip Frequency and Optimum Height of Cut Range:
.
Model No Clip (max.)
04408 0.25 in.
04406 0.18 in.
Roller Adjustment:
Front: Micrometer hand adjustment with bolted clamp
lock (1 turn = 0.025 in. height of cut change).
Rear: Pivot arm change on slot in side plate with locking
nuts for paralleling roller to reel and adjusting bedknife
attitude.
1. Lift bail
2. Grease fittings - reel bearings
3. Grease fittings - roller
4. Height of cut adjustment knob (2)
Specifications
Bedknife to Reel Adjustment: Bedknife adjusts
against reel with opposed screw adjustment on each
end of bedbar.
Optimum Height
Reel Speed: 1940 rpm (engine speed 2800 rpm).
of Cut Range
3/16 to 5/16 in.
Bedknife Screw Torque: 200 to 250 in-lb.
1/8 to 7/32 in.
Reel Splined Drive Nut Torque: 40 to 60 ft-lbs.
Reel Bearing Rolling Torque: 7 in-lb. max.
Front or Rear Roller Run-Out: 0.014 in. max.
5. Height of cut adjustment locknut
6. Scraper adjusting nut (4)
7. Pull rod studs (2)
Page 7 - 2
8. Grass shield
9. Adjustable grass shield bar
10. Reel
Greensmaster 3150