Warnings - ABB PST30 Installation And Commissioning Manual

Settings
Functional Settings
Figure 29: Warnings group
1SFC132003M0201

7:2.4.4 Warnings

To set parameters related to the warnings, enter the
Warnings group:
Start/Stop
Torque control
High current warning (Warn I=High)
Protections
Activate the warning function if required by changing to Yes.
Press Store to save the selected operation
Warnings
High current warning level (Wa I=H Lev)
Faults
Set the level of the high current warning.
Available only if the function is selected.
Inputs
Press Store to save the selected operation.
Outputs
Low current warning (Warn I=Low)
Analog Output
Activate the warning function if required by changing to Yes.
Fieldbus
Press Store to save the selected operation.
Low current warning level (Wa I=L Lev)
Seq Start
Set the level of the low current warning.
Available only if the function is selected.
Press Store to save the selected operation.
Overload warning (Warn OL)
Activate the warning function if required by changing to Yes.
Press Store to save the selected operation.
Overload warning level (Wa OL Lev)
Set the level of the overload warning.
Available only if the function is selected.
Press Store to save the selected operation.
Thyristor overload warning (Warn SCR OL)
Activate the warning function if required by changing to Yes.
Press Store to save the selected operation.
Chapter 7
Settings and configuration
101