Copy/Exchange Channel Dialog - ABB i-bus KNX Product Manual


ABB i-bus KNX
Commissioning
3.1.4

Copy/exchange channel dialog

At the top left, you will see the source channel selection window for marking the source channel. Beside is
located the selection window for the target channel or channels for marking the target channel or channels.
Source channel
With the selection of the source channel, you define which parameter settings should be copied or
exchanged. Only one source channel can be selected at a time.
Target channels
With the selection of the target channels, you define which channel/channels are to assume the parameter
settings of the source channel.

For the function Exchange only one target output can be selected at a time.

For the function Copy, different target channels can be selected simultaneously. For this purpose,
press the Ctrl key and mark the required channels with the mouse cursor, e.g. channels B and C.
22 2CDC 508 101 D0201 | VAA/S x.230.2.1
With this button, you select all available target channels, e.g. A...C.
Reset the selection of the target channel with this button.