Copy/Exchange Channels Dialog - ABB i-bus KNX Product Manual


ABB i-bus KNX
Start-up
3.1.2.2

Copy/Exchange channels dialog

At the top left, you will see the Source channel selection window for marking the source channel. Beside
this is the selection window for the target channel or channels for marking the target channel or channels.
Source channel
The source channel selection defines which parameter settings should be copied or exchanged. Only one
source channel can be selected at a time.
Destination channels
By selecting the destination channel(s), you define which channel(s) are to assume the parameter settings
of the source channel.

For the Exchange function, only one destination output can be selected at a time.

For the Copy function, various destination channels can be selected simultaneously. For this purpose,
press the Ctrl key and mark the required channels with the mouse cursor, e.g. channels B and C.
With this button, you select all available destination channels, e.g. A...C.
Reset the selection of the destination channels with this button.
JRA/S | 2CDC 506 051 D0204 37