Parameter Window A: General - ABB i-bus KNX Product Manual


ABB i-bus KNX
Start-up
3.2.4

Parameter window A: General

The general settings for output A are undertaken in this parameter window.
Operation mode
Options:
This parameter defines the operation mode of the output. The communication objects and the parameters
for the respective output differ slightly depending on the operation mode. The operation modes Control
with slat adjustment and Control without slat adjustment only differ slightly on account of the slat
adjustment functions. For this reason, these are described using the Control with slat adjustment operation
mode. The parameters as well as the communication objects, which are not available or are exclusively
available in the operation mode Control without slat adjustment, are specially marked.
You can find the description of the parameters for the operation mode Ventilation flaps, switch mode on
p. 87 onwards.
Control with slat adjustment
Control without slat adjustment
Ventilation flaps, switch mode
JRA/S | 2CDC 506 051 D0204 49