Jra/S X.230.2.1 Blind / Roller Shutter Actuator With Manual Operation, X-Fold, 230 V, Mdrc; Technical Specifications - ABB i-bus KNX Product Manual


ABB i-bus KNX
Device technology
2.3 JRA/S X.230.2.1 Blind / Roller Shutter Actuator with Manual Operation, x-
fold, 230 V, MDRC
JRA/S 8.230.2.1
2.3.1

Technical specifications

Supply
Outputs
Connections
The 2, 4 and 8-fold blind/roller shutter
actuators with manual operation control
230 V AC drives, acting independently of
one another, to position blinds, roller
shutters, awnings and other
blinds/shutters via ABB i-bus
addition, the devices control, for
example, ventilation flaps, gates and
windows.
As protection against damage to the
drives, the output contacts are
interlocked electromechanically.
The devices require no separate
auxiliary voltage.
Operating voltage
Current consumption KNX
Power consumption KNX
JRA/S type
Number of outputs UP/DOWN
U rated voltage
N
I rated current
N
Maximum switching current
Minimum switching current
Leakage loss per device at max. load
Drives (terminals, output A...X)
Phase L1...L3 (terminal U
)
N
Conductor cross-sectional area, screw terminals
Tightening torque
®
ABB i-bus KNX
The outputs can be directly controlled on
the device using the manual
pushbuttons. The LEDs on the front of
the device signal the status of the
outputs.
®
KNX. In
Individual outputs can be copied or
exchanged to reduce the programming
effort.
The blind/roller shutter actuators are
modular installation devices for
installation in the distribution board on
35 mm mounting rails. The connection to
the ABB i-bus
connection terminals.
21 ... 30 V DC via KNX
< 12 mA
Maximum 250 mW
2.230.2.1
2*
(Interlocked electromechanically)
* independent outputs for up to 2
drives each in parallel operation.
Maximum 230 V AC, 45 ... 65 Hz
6 A
6 A (AC1/AC3) at 230 V AC or
6 A (AC1/AC3) at 400 V AC
100 mA at 5 V or
10 mA at 10 V or
1 mA at 24 V
< 2 W
For each output, 2 screw terminals (UP/DOWN)
with universal head
2 or 4 screw terminals with universal head
Rigid 0.2...6 mm², flexible 0.2...4 mm²
Flexible with wire end ferrules without/with
plastic sleeve 0.25...4 mm²
Max. 0.6 Nm
Bus connection terminal (black/red), 0.8 mm Ø,
single-core
®
is implemented via bus
4.230.2.1 8.230.2.1
4 8
< 2 W < 4 W
JRA/S | 2CDC 506 051 D0204 17