ABB i-bus KNX Product Manual page 112


ABB i-bus KNX
Planning and application
Control with slat adjustment (blinds, vertical blinds, etc.)
After an UP movement of the blind, the slats are usually open (horizontal slat position). If the blind is now
moved downwards, the slats are first closed (vertical slat position) and the blind moves downwards. If the
blind is now moved upwards again, then the slats are first opened (horizontal slat position) and then
moved upwards (see Fig.).
To adjust the slat angle in a targeted manner, short movements can be executed. This means that, for a
short parameterized time (the so-called Duration of slat adjustment), the blind will be moved in a stepped
manner in the required direction, thus adjusting the slats. The smaller the Duration of slat adjustment is,
the more accurately the slat angle can be adjusted.
110 2CDC 506 051 D0204 | JRA/S