Procedure - ABB i-bus KNX Product Manual


ABB i-bus KNX
Start-up
3.1.1.1

Procedure


Insert the desired device into your project.

Import the current application program into the ETS.

Perform your parameterizations and program the device.

After you have parameterized a device, you can transfer the settings to a second device.

Right click the product and select Plug-in > Convert in the context menu for this purpose.

Then make the desired settings in the Convert dialog.

Finally, you must replace the physical address and
Should you wish only to copy individual inputs/outputs within a device, use the
parameter settings
34 2CDC 506 051 D0204 | JRA/S
function, p. 35.
delete the old device.
Copying and exchanging