ABB i-bus KNX Product Manual page 122


ABB i-bus KNX
Planning and application
Output/contact position
Travel times
(via travel detection)
Weather alarms
Positions 1...4 (Presets)
Scene
Automatic sun protection
Status messages
Manual operation
120 2CDC 506 051 D0204 | JRA/S
Function
Bus voltage recovery
Depending on the setting of
the parameter Reaction after
bus voltage recovery
Values remain intact
Communication object values are reset. Monitoring times are restarted
Values are retained
Scene settings remain
intact. Communication
object value is reset
Depending on the setting of
the parameter Reaction after
bus voltage recovery
Values sent after output update, if parameterized
Depending on the setting of the parameter Manual operation after bus voltage recovery,
programming and ETS reset
Reaction on
Download
Depending on the setting of the parameter
Reaction after download or ETS reset
Communication object values
remain intact, according to
the setting of the parameter
Delete saved travel times
after download or are
overwritten with the default
settings
(60 s for UP or DOWN)
Positions are backed up,
depending on the setting of
the parameter Overwrite
position values (presets) on
download or are overwritten
with the parameterized
values
Scene settings are backed
up, depending on the setting
of the parameter Overwrite
scenes on download or are
overwritten with the
parameterized values
Depending on the setting of the parameter
Reaction after programming or ETS reset
ETS reset
Travel times are
overwritten with default
settings
(60 s for UP or DOWN).
Values of the
communication objects are
reset
Scene settings and value
of the communication
object are reset