Using The Product Manual; Structure Of The Product Manual - ABB i-bus KNX Product Manual


ABB i-bus KNX
General
1.1

Using the product manual

This manual provides detailed technical information on the function, installation and programming of the
ABB i-bus
This manual is divided into the following chapters:
Section 1
Section 2
Section 3
Section 4
Section A
1.1.1

Structure of the product manual

All parameters are initially described in chapter 3. Directly following the parameter descriptions, you can
find descriptions for the communication
The functions of the JRA/S x.y.5.1 Blind / Roller Shutter Actuator with Travel Detection and Manual
Operation are explained using the operation mode Control with slat adjustment. The device types JRA/S
x.y.2.1 and JRA/S x.y.1.1 do not possess some parameters or the corresponding communication objects.

JRA/S x.y.2.1 does not possess a travel detection function

JRA/S x.y.1.1 does not possess manual operation nor a travel detection function
The parameters as well as the communication objects, which are not available or are exclusively available
in the operation mode Control without slat adjustment, are specially marked.
Note
The device features several outputs. However, as the functions for all outputs are identical, only the
functions of output A will be described.
4 2CDC 506 051 D0204 | JRA/S
®
KNX Blind / Roller Shutter Actuator. The application of the device is explained using examples.
General
Device technology
Commissioning
Planning and application
Appendix
objects.