Custom Service Menu Access Count Clear (Cclr); Message Waiting Lamp Retry Times (Mwl); Setting Minimum Recording Length (Mrl) - Panasonic KX-TVS50 Installation Manual

[4]-Dept Dial:

7.2.12 Custom Service Menu Access Count Clear (CCLR)

Each Custom Service has an access counter that counts the number of times the service has
been accessed. This command clears this counter.
Type CCLR, Press Space, and Enter Custom Service Menu (1-100), then Press RETURN.
$ CCLR 20
Custom Menu <20> Access Counter Cleared !!
Note
Type CCLR 0 to clear the access counters of all Custom Services.

7.2.13 Message Waiting Lamp Retry Times (MWL)

This command is used to specify the number of times the VPS will attempt to turn on the
Message Waiting Lamp of the called extension. This setting is required when a PBX other than
the Panasonic KX-T series telephone system is used.
$ MWL
Current Setting of M.W.L. Retry Count is 1
Enter M.W.L. Retry Count (1-3) =
Note
This setting is not valid if "Message Waiting Lamp for Every Message" is set to "Yes."

7.2.14 Setting Minimum Recording Length (MRL)

This command is used to specify the minimum message recording length (0-3 s). Messages
shorter than this setting are discarded from the mailbox.
Note
The minimum recording length can only be set using this command.
1.
Type MRL, then Press RETURN.
SYSTEM MAINTENANCE AND TROUBLESHOOTING
Department Dialing menu will play when the "4" is
pressed.
7.2 UTILITY COMMANDS
145