Panasonic KX-TVS50 Installation Manual page 237

Parameter
Outgoing Call
Setup
Sequence
Other Parameters - Message Waiting Notification
The following parameters are used to control the handling of message waiting notification
calls.
To select the Message Waiting Notification Parameter, follow the menu path as
shown:
System Administration Top Menu - 1 - 5 - 7 - 3
Parameter
Outgoing Call
Ports
SYSTEM ADMINISTRATOR'S GUIDE
B6 SYSTEM ADMINISTRATION - SYSTEM PARAMETER SETTINGS
Value Range
(Default)
Up to 12 digits Specifies the sequence of codes used by the VPS when
consisting of calling an outside line. Up to 12 digits can be set. The
default value is "T." "T" indicates that the system will
0-9, , #, F, R, S, T,
dial the outside phone number only after detecting a
W
dial tone.
(T)
Example:
9W = (9) - 1-s wait - dial outside phone number. "9" is
the CO line access number.
F: Hook Flash
R: Ringback Tone Detection
S: Silence Detection
T: Dial Tone Detection
W: Wait for 1 s
1-9, 0, , #: Dial Codes
Value Range
(Default)
Port No. Specifies the port numbers used for the Message Waiting
(1, 2) Notification Device feature. The VPS makes outgoing
calls using the port specified in this field. At least 1 port
must be specified.
Table 55
Description/Function
Table 56
Description/Function
237