Panasonic KX-TVS50 Installation Manual page 236

B6 SYSTEM ADMINISTRATION - SYSTEM PARAMETER SETTINGS
Other Parameters - Dialing Parameter
To select Dialing Parameter, follow the menu path as shown:
System Administration Top Menu - 1 - 5 - 7 - 2
Parameter
Number of
Digits
to Access
Outside Line
Call Transfer
No Answer
Time
Outgoing Call
No Answer
Time
Pause Time
236
Table 55
Value Range
(Default)
0-8 digits Specifies the number of digits necessary to access an
(1) outside line.
Example:
If the PBX requires callers to dial "9" to access an
outside line, this parameter should be set as "1." This
enables the system to recognize that an outgoing call
setup sequence is completed once the initial "9" has
been dialed (9-123-4567). The full sequence is
therefore: 9 - (outgoing call setup sequence) - 123-
4567.
The VPS can discriminate between local and long
distance calls and can report outgoing calls and calling
times for billing purposes on periodic port usage
reports.
10-60 s Specifies the amount of time that the VPS must wait
(20) before retrieving the transferred call when there is no
answer at the destination extension.
10-90 s Specifies the amount of time that the VPS must wait
(30) before concluding that there is no answer at the outside
number called.
1-9 s Specifies the pause time between dialed digits.
(2)
Description/Function
SYSTEM ADMINISTRATOR'S GUIDE