Panasonic KX-TVS50 Installation Manual page 209

Parameter
Prompt mode
Authorization
for Message
Notification
Beeper
Callback
No. Entry
Mode
MWL
Notification for
Unreceived
Message
SYSTEM ADMINISTRATOR'S GUIDE
B3 SYSTEM ADMINISTRATION - SETTING COS (CLASS OF SERVICE) PARAMETERS
Value Range
(Default)
1. System Specifies the language used for voice prompts.
2. User 1
3. User 2
Note: If User 1 or User 2 is specified as Prompt Mode but
(User 1)
not recorded by the Message Manager, the VPS will
automatically play the factory recorded system prompts in
English. By default, both User 1 and User 2 prompts are not
recorded.
1. Yes When set to "Yes," the Message Manager is able to utilize
2. No the Message Waiting Notification feature. The sub-
(Yes) parameters to be set include Beeper Callback No. Entry
Mode, MWL Notification for Unreceived Message, and
Device Notification for Unreceived Message. If set to "NO",
sub-parameters cannot be assigned.
1. Caller Permits the Message Manager to use the Callback Number
Select Entry feature.
2. Without
3. Before
Caller
4. After
Select:
5. Disable
(Disable)
Without:
Before:
After:
Disable:
Note: To utilize this feature, the callback number entry code
must be included in the Subscriber's beeper number. When
"Disable" is selected or if the caller does not enter a callback
number, "System Callback No." (See Table 56) will be
displayed on the beeper's display. If a caller's number is
received through a telephone company's Caller ID service,
the caller's number will be displayed instead of "System
Callback No."
1. Yes The message waiting lamp is illuminated when this
2. No parameter has been set to "Yes" and when unplayed
(Yes) messages remain after the Message Manager has accessed
the mailbox.
Table 38
Description/Function
After recording a message, the caller is asked
if the message is urgent. If urgent, the caller is
asked to enter the callback number.
Without recording a message, the caller is
asked to enter the callback number.
Before recording a message, the system asks
the caller to enter the callback number.
After recording a message, the system asks the
caller to enter the callback number.
Disables the Callback Number Entry feature.
209