7.5.3.8 SETΔCHECK_NUMBER
This command is used to assign a limit to number of digits for calling/called party number (since version
09.00.00.00). Calling/called party number sent via IPX network may be limited to numbers only.
Pressing the Enter key can skip the item. To make this assignment effective, it is required to execute the
"REBOOT" command to restart the MG-SIP16.
Note: Assign this command adjusting to the specifications on SIP network.
7.5.3.9 SETΔCPN_PATTERN
This command is used to assign how to obtain CPN (Calling Party Number), available since version
09.00.00.00. It is possible to change the priority of obtaining calling party number when a call terminates via SIP
network. Pressing the Enter key can skip the item. To make this assignment effective, it is required to execute the
MG-SIP
Page 30 of 75
5/8/2009