Setδmusictype; Setδprack; Setδpre_Negotiation_Port_No; Setδprivacy_Pattern - NEC MG-SIP Configuration Manual

7.5.3.25 SETΔMUSICTYPE
This command is used to select music type that is sent from MG-SIP16. Pressing the Enter key can skip the item. In
this case, default values are assigned automatically. To make this assignment effective, it is required to execute the
"REBOOT" command to restart the MG-SIP16.
7.5.3.26 SETΔPRACK
This command is used to enable/disable Provisional Response Acknowledgement (PRA) function. When this is set
enabled, the cyclical-send of provisional response function can be specified. Pressing the Enter key can skip this
item. In this case, default values are assigned automatically. To make this assignment effective, it is required to
execute the "REBOOT" command to restart the MG-SIP16.
Note: Assign this command adjusting to the specifications on the SIP network.
7.5.3.27 SETΔPRE_NEGOTIATION_PORT_NO
This command is used to specify the UDP port number that receives packets regarding the voice control path.
Pressing the Enter key can skip the item. In this case, default values are assigned automatically. To make this
assignment effective, it is required to execute the "SAVE" command and to restart the MG-SIP16 by using the
"REBOOT" command.
7.5.3.28 SETΔPRIVACY_PATTERN
This command is used to specify a type of Calling Line Identification Non-Presentation. Pressing the Enter key can
skip the item. In this case, default values are assigned automatically. To make this assignment effective, it is
required to execute the "REBOOT" command to restart the MG-SIP16.
MG-SIP Page 43 of 75 5/8/2009