Setδdefault; Setδdnsaddress - NEC MG-SIP Configuration Manual

7.5.3.10 SETΔDEFAULT
The command is used to set back to the default setting of MG-SIP16 configuration. Executing this command saves
the default setting to the flash memory. To make this assignment effective, it is required to restart the MG-SIP16 by
using the "REBOOT" command.
7.5.3.11 SETΔDNSADDRESS
This command is used to specify the DNS IP address. Pressing the Enter key can skip the item. In this case, default
values are assigned automatically. To make this assignment effective, it is required to execute the "REBOOT"
command to restart the MG-SIP16.
MG-SIP Page 32 of 75 5/8/2009