Accessories; Tzidc-110; Communication; Device Name - ABB TZIDC Operating Instructions Manual

9.1.10 Accessories

Mounting material
- Attachment kit for linear actuators to DIN/IEC 534 / NAMUR
- Attachment kit for rotary actuators to VDI / VDE 3845
- Attachment kit for integral mounting to control valves
- Attachment kit for actuator-specific attachment upon request
Pressure gauge block
- With pressure gauges for supply and output pressure.
- Pressure gauges with housing ø 28 mm
- Aluminum connection block in black
- Installation material in black for mounting to TZIDC
Filter regulator
All metal version in brass, varnished black, bronze filter element,
(40 µm) , with condensate drain.
max. pre-pressure 16 bar (232 psi), output adjustable to 1.4 ... 6 bar
(20.31 ... 90 psi).
IMPORTANT (NOTE)
The filter regulator may only be installed in combination with
the pressure gauge block (accessory).
PC adapter for communication
LKS adapter for plug-in connection to TZIDC
FSK modem for HART communication
PC software for remote configuration and operation
DSV401 (SMART VISION) with DTM for TZIDC to CD-ROM
9.2

TZIDC-110

9.2.1

Communication

Profiles
Block types
Physical Layer
Transmission rate
Supply voltage
Max. permissible voltage
Power consumption
Current in the event of an
error
9.2.2

Device name

Device name
PNO ID no.
Dev. ID
Bus address
42/18-84-EN
Profibus PA profile for process
devices
Electro-pneumatic actuators V3.0
1 AO Functional block
1 Transducer block
1 physical block
In compliance with IEC 61158-2
31.25 Kbit/s
Power feed from the PA bus,
9.0 ... 32.0 V DC
35 V DC
10.5 mA
15 mA (10.5 mA + 4.5 mA)
TZIDC-X10
0x0639
0X3200028xyz
Between 0 and 126, default address
126
TZIDC, TZIDC-110, TZIDC-120
9.2.3

Output

Range
Air capacity
Output function
Shut-off values
9.2.4

Travel

Ste
Rotation angle
Used range
25 ... 120° rotary actuators, optionally 270°
25 ... 60° linear actuators
Travel time
prolongation
Setting range 0 ... 200 seconds, separately for each
direction
9.2.5

Air supply

Instrument air
Supply pressure
IMPORTANT (NOTE)
Do not exceed the maximum operating pressure of the
actuator!
Air consumption
Specifications
0 ... 6 bar (0 ... 90 psi)
at 1.4 bar (20 psi) supply pressure
3
5.0 kg/h = 3.9 Nm /h = 2.3 scfm
at supply pressure of 6 bar (90 psi)
3
13 kg/h = 10 Nm /h = 6.0 scfm
For single or double-acting actuators,
air is vented from actuator or actuator
is blocked in case of (electrical) power
failure
end position 0 % = 0 ... 45 %
end position 100 % = 55 ... 100 %
free of oil, water and dust to DIN/ISO
8573-1. Pollution and oil content
according to Class 3 (purity: max.
particle size = 5 µm, max. particle density
3
= 5 mg / m ; oil content: max.
3
concentration = 1 mg / m ; pressure dew
point: 10 K below operating temperature)
1.4 ... 6 bar (20 ... 90 psi)
< 0.03 kg/h / 0.015 scfm (independent
of supply pressure)
43