Operating Modes - ABB TZIDC Operating Instructions Manual

Commissioning
7.1.1

Operating modes

Selection from the operating level:
• Press and hold down
• Press and release
• Release
• The position is displayed in % or as a rotation angle.
Operating mode
1.0
Control mode
with adaptation (the control parameter)
1.1
Control mode
without adaptation (the control parameter)
1.2
Manual adjustment
Adjust with
1.3
Manual adjustment
Adjust with
1) Since self-optimization in operating mode 1.0 is subject to several factors during control operation with adaptation,
incorrect adjustments could be made over an extended period.
2) Position not active
3) For high-speed mode: Press
32
.
rapidly as often as required. The selected operating mode is displayed.
.
1)
1)
2)
in the operating range.
3)
or
2)
in the sensor range.
3)
or
and simultaneously
TZIDC, TZIDC-110, TZIDC-120
Mode indicator
°
C
%
mA
conf
°
C
%
mA
conf
°
C
%
mA
conf
°
C
%
mA
conf
Position indicator
° C
%
mA
conf
°
C
%
mA
conf
° C
%
mA
conf
°
C
%
mA
conf
42/18-84-EN