ABB TZIDC Operating Instructions Manual page 80

Parameter descriptions
Lev Display Function
P7._ CTRL_PAR
P7.0 KP UP
KP value, up
P7.1 KP DN
KP value, down
P7.2 TV UP
TV value, up
P7.3 TV DN
TV value, down
P7.4 Y-OFS UP
Y offset, up
P7.5 Y-OFS DN
Y offset, down
P7.6 TOL_BAND
Toleranzband (zone)
P7.7 DEADBAND
Deadband
P7.8 DB_APPR
Deadband Approach
P7.9 TEST
Test
P7.10 EXIT
Return
P8._ ANLG_OUT
P8.0 MIN_RGE
Min. range
P8.1 MAX_RGE
Max. range
P8.2 ACTION
Action
P8.3 ALARM
Alarm current
P8.4 RB_CHAR
Readback character.
P8.5 TEST
Test
P8.6 EXIT Return
P9._ DIG_OUT
P9.0 ALRM_LOG
Alarm logic
P9.1 SW1_LOG Switchpoint 1 logic
P9.2 SW2_LOG
Switchpoint 2 logic
P9.3 TEST
Test
P9.4 EXIT
Return
P10._ DIG_IN
P10.0 FUNCTION
Function select
P10.1 EXIT Return
P11._ FS/IP
P11.0 FAIL_POS
Save position
P11.1 FACT_SET
Factory setting
P11.2 IP-TYP
I/P module type
P11.3 EXIT
Return
80
Funktion
KP-Wert, nach oben
KP-Wert, nach unten
TV-Wert, nach oben
TV-Wert, nach unten
Y-Offset, nach oben
Y-Offset, nach unten
Toleranzband (Zone)
Totband
Totbandannäherung
Test
Zurück z. Arbeitsebene
Strombereich Min.
Strombereich Max.
Wirkrichtung d. Kennl.
Alarmmeldung
Zurückgerechn. Charakt.
Test
Zurück z. Arbeitsebene
Logik Alarmausgang
Logik SW1
Logik SW2
Test
Zurück z. Arbeitsebene
NONE, POS_0 %, POS_100 %, POS
Funktionsauswahl
Zurück z. Arbeitsebene
Sicherheitsstellung
Werkseinstellung
NO_F_POS,F_SAFE_1,F_SAFE_2,
Typ des l/P-Moduls
Zurück z. Arbeitsebene
TZIDC, TZIDC-110, TZIDC-120
Parameter
0.1 ... 120.0
0.1 ... 120.0
10 ... 450
10 ... 450
0.0 ... 100.0
0.0 ... 100.0
0.3 ... 10.0
0.10 ... 10.00
SLOW, MEDIUM, FAST
Function
Function
4.0 ... 18.4
20.0 ... 5.7
DIRECT, REVERSE
HIGH_CUR, LOW_CUR
DIRECT, RECALC
Function
Function
ACTIVE_HI, ACTIVE_LO
ACTIVE_HI, ACTIVE_LO
ACTIVE_HI, ACTIVE_LO
Function
Function
_HOLD
Function
ACTIVE, INACTIVE
Function
F_FREEZE1,F_FREEZE2
Function
Unit Factory setting
--- 5.0
--- 5.0
--- 200
--- 200
% 48.0
% 48.0
% 1.5
% 0.10
--- INACTIVE
--- NV_SAVE
mA 4.0
mA 20.0
--- DIRECT
--- HIGH_CUR
DIRECT
--- NONE
--- ---
--- ACTIVE_HI
--- ACTIVE_HI
--- ACTIVE_HI
--- NONE
--- NV_SAVE
--- NONE
--- ---
--- INACTIVE
--- START
--- [CUSTOM]
--- NV_SAVE
42/18-84-EN