Jumper Configuration On Mainboard (Tzidc-120 Only) - ABB TZIDC Operating Instructions Manual

Electrical connections
5.2

Jumper configuration on mainboard (TZIDC-120 only)

Fig. 17
1 Simulation
2 Write access
There are two jumpers on the mainboard that can be used to activate or block simulation mode
and write access. Set the jumpers as shown below:
Fig. 18
1 Block (Simulation blocked
2 Activate (Write access enabled
1) Default setting (complies with Fieldbus Foundation standard)
26
1)
)
1)
)
TZIDC, TZIDC-110, TZIDC-120
1
2
1
2
M00494
M00495
42/18-84-EN