7.2.2
Sample parameters
"Change the zero position of the LCD screen from clockwise (CLOCKW) to counter-
clockwise stop (CTCLOCKW)"
Starting position: The positioner is in bus operation on the operating level
1. Switch to the configuration level:
•
•
•
•
2. Switch to parameter group 3._:
•
•
•
3. Select parameter 3.2:
•
•
•
4. Change parameter settings:
•
42/18-84-EN
Press and hold down
Press and release
Wait for the countdown to go from 3 to 0
Release
and ,
is displayed
Press and hold down
Press and release
twice,
is displayed
Release
and
is displayed
Press and hold down
Press and release
twice,
is displayed
Release
Press and release
to select
TZIDC, TZIDC-110, TZIDC-120
and
simultaneously
and
simultaneously
,
Commissioning
37