Siemens SINUMERIK 810D Commissioning Manual page 64

Installing software and network operation
3.2 Settings for network drives
If you have toggled to TCP/IP, the expanded Change Network Settings screenform displays
an additional point 6 Change TCP/IP settings, if TCP/IP has been set as the current protocol.
Screenform to toggle from TCPIP → NETBEUI, connection already established:
---------------------------------------------------------------------------------------------------------------
CURRENT NETWORK SETTINGS:
Machine Name: PCUXXXXXXX
User Name: auduser
Transport Protocol: TCPIP, get IP Addresses automatically via DHCP
Logon to domain: No
PLEASE SELECT:
1 Change Machine Name (for DOS Net only)
2 Change User name
3 Toggle Protocol (NETBEUI or TCPIP)
4 Toggle logon to domain (Yes or No)
6 Change TCPIP settings
9 Back to previous Menu
Your choice [1, 2, 3, 4, 6, 9]?
WARNING:
You already had a connection with TCPIP, now you want to toggle
the protocol.
You can do this (and save the changes), but then you can't
connect again without rebooting!
Do you really want to toggle the protocol [Y, N]?
---------------------------------------------------------------------------------------------------------------
4 Toggle logon to domain (Yes or No)
If Toggle logon to domain is acknowledged with Y, and the domain password is stored in the
password list, the system connects to the server immediately and activates the associated
login script, if defined.
If Toggle logon to domain is acknowledged with N, a dialog box for entering the domain and
password appears. The same applies if the domain password is not included in the
password list.
Domain logon is only activated if Y is set.
5 Change DOMAIN Name
This can be used in the same way as the name changes in options 1 and 2.
If Toggle logon to domain is acknowledged with N, the additional item 5 Change DOMAIN
Name is omitted from menu Change Network Settings.
3-16
Commissioning Manual, 10/2006, 6FC5397-0DP10-0BA0
PCU Basesoftware (IM6)