Restoring Partition E: (Windows) On The Pcu - Siemens SINUMERIK 810D Commissioning Manual

6. Select the backup image you require.
Result:
After each restore process, partitions E: and F: are checked by the CHKDSK test program
the next time the system boots. A reboot is performed between the checks on E: and F:
4.2.3

Restoring Partition E: (Windows) on the PCU

Figure 4-8
Operator action
While the PCU is ramping up (after switching the controller off and then on again)
1. Select the "Service menu" [hidden menu entry] in the Boot Manager.
2. Press key <7>: Backup/Restore
3. Enter one of the passwords for authorization levels 0 - 2.
Your Choice [1, 4, 5, 9]?
4. Press key <4>.
PCU Basesoftware (IM6)
Commissioning Manual, 10/2006, 6FC5397-0DP10-0BA0
On confirming your choice, the warning "All data will be overwritten" is displayed and
restoration of the chosen backup image to partitions C:, E: and F: is started. On
completion of the partition data restore, the message "Restore finished" is displayed.
Restoring partition E data
The main menu is displayed:
The system prompts you to enter a password:
The following menu is displayed:
PLEASE SELECT
1 Harddisk Backup/Restore with GHOST
4 Partitions Backup/Restore with GHOST
(locally)
5 ADDM Backup/Restore
9 Back to Main Menu
Backing up and Restoring Data
4.2 Backing up and restoring PCU partitions locally
4-19