Restoring Partitions - Siemens SINUMERIK 810D Commissioning Manual

3. Press key < 9 > Back to previous Menu: Return to the previous menu
"Optional" end
The following steps are always applicable:
1. Press key < 2 >: Partitions Backup, Mode LOCAL
2. Press key < 9 > Back to previous Menu: Return to the previous menu
4.2.2

Restoring partitions

Figure 4-7
Operator action
While the PCU is ramping up (after switching the controller off and then on again)
1. Select the "Service menu" [hidden menu entry] in the Boot Manager.
2. Press key <7>: Backup/Restore
3. Enter one of the passwords for authorization levels 0 - 2.
PCU Basesoftware (IM6)
Commissioning Manual, 10/2006, 6FC5397-0DP10-0BA0
You are prompted for the name under which the new local backup image is to be stored,
e.g., BACKUP1. Length of name: max. 7 characters.
Under "Description" you are asked whether you want to store an additional description for
the local backup image, e.g., "Data backup1 by Hugo".
In the restore process, this additional description is offered as a selection text in the list of
available backup images (if there is no description, the name of the backup image is
displayed in the list).
You are asked whether you want the new local backup image to be used as an
emergency backup image too (and any existing emergency backup image to be deleted).
Partition data backup to D: is then started.
A file is created on D: in the IMAGES directory for every partition, e.g., BACKUP1.gh1,
BACKUP1.gh3, BACKUP1.gh4. In the restore process, they are recognized as logically
belonging to one backup image.
On completion of the partition data backup, the message "Backup finished" is displayed.
Partition data restore from drive TEMP (D:)
The main menu is displayed:
The system prompts you to enter a password:
The following menu is displayed:
Backing up and Restoring Data
4.2 Backing up and restoring PCU partitions locally
4-17