Jam Codes - Canon i-SENSYS MF229dw Service Manual

Code Detection description
When the same error repeatedly occurs after several
times of turning the power OFF/ON, execute the following
remedies.
(1) Check the connection of connectors between the Main
Communication error
Controller Board (J601, J602) and the FAX-NCU Board
with CCU/modem, or no
E736 0000 (J1201, J1204).
FAX board installed on
(2) Replace the connectors between the Main Controller
FAX model.
Board (J601, J602) and the FAX-NCU Board (J1201,
J1204).
(3) Replace the FAX-NCU Board.
(4) Replace the Main Controller Board.
When the same error repeatedly occurs after several
Error detection on either times of turning the power OFF/ON, execute the following
E740 0002 Network Board or Mac remedies.
address (1) Check the connection of the network cable.
(2) Replace the Main Controller Board.
When the same error repeatedly occurs after several
times of turning the power OFF/ON, execute the following
0002 Language file error
remedies.
Update the set of the Controller Firmware
When the same error repeatedly occurs after several
times of turning the power OFF/ON, execute the following
Engine ID error (Invalid
remedies.
4000 engine connection is
E744 (1) Check the DC Controller Board.
detected)
(2) Update the Engine Firmware.
(3) Update the set of the Controller Firmware
When the same error repeatedly occurs after several
Communication error times of turning the power OFF/ON, execute the following
6000 with Wireless LAN remedies.
board. (1) Replace the Wireless LAN Board.
(4) Replace the Main Controller Board.
When the same error repeatedly occurs after several
Fan Motor cannot rotate times of turning the power OFF/ON, execute the following
E806 0000 at specified revolution remedies.
speed. (1) Replace the Main Fan Unit.
(2) Replace the DC Controller Board.
When the same error repeatedly occurs after several
times of turning the power OFF/ON, execute the following
Fixing Assembly_Edge
E808 0001 remedies.
Left Cooling Fan error
(1) Replace the Edge Left Cooling Fan.
(2) Replace the DC Controller Board.
When the same error repeatedly occurs after several
times of turning the power OFF/ON, execute the following
Fixing Assembly_Edge
E808 0002 remedies.
Right Cooling Fan error
(1) Replace the Edge Right Cooling Fan.
(2) Replace the DC Controller Board.
7
Error Codes > Jam Codes
Remedy
T-7-2
7 Error Codes > Jam Codes

Jam Codes

Jam Codes Cause
Scanner Jam Codes
0001H Non-DES sensors.
0002H DES Sensor Stationary
0094H Initial Stationary
0095H Pickup NG
0071H Timing error
Printer Jam Codes
0004H Re-pickup Delay Jam
0005H Multi-purpose tray pickup delay jam
0008H Pickup Stationary Jam
000CH Fixing Delivery Delay Jam
0010H Fixing Delivery Stationary Jam
0014H Internal Paper Jam
0018H Door Open Jam
001CH Wrap Jam
0020H Reversal Delay Jam
0021H Reversal Stationary Jam
7-4
T-7-3
7-4