Function - Canon i-SENSYS MF229dw Service Manual

■ CCD
COPIER > ADJUST > CCD
Sub item Description
FBTAR-R Shading target value for RED in copyboard reading
Setting range: 128 ~ 384
[Value after RAM clear: 290]
FBTAR-G Shading target value for GREEN in copyboard reading
Setting range: 128 ~ 384
[Value after RAM clear: 284]
FBTAR-B Shading target value for BLUE in copyboard reading
Setting range: 128 ~ 384
[Value after RAM clear: 278]
FBTAR-BW Shading target value in copyboard black and white reading
Setting range: 128 ~ 384
[Value after RAM clear: 301]
DFTAR-R Shading target value for RED in DF reading
Setting range: 128 ~ 384
[Value after RAM clear: 334]
DFTAR-G Shading target value for GREEN in DF reading
Setting range: 128 ~ 384
[Value after RAM clear: 323]
DFTAR-B Shading target value for BLUE in DF reading
Setting range: 128 ~ 384
[Value after RAM clear: 318]
DFTAR-BW Shading target value in black and white reading
Setting range: 128 ~ 384
[Value after RAM clear: 341]
■ TOUCHCHK
COPIER > ADJUST > CCD
Sub item Description
CCD To adjust the coordinate on the Touch Panel.
8
Service Mode > COPIER > FUNCTION > MISC-R
ADF Other
model
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes No
Yes No
Yes No
Yes No
T-8-8
Common to all
models
Yes
T-8-9
8 Service Mode > COPIER > FUNCTION > MISC-R

FUNCTION

■ CLEAR
COPIER > FUNCTION > CLEAR
Sub
Item
item
TEL-USER Clear the user data and the registered address data.
SSSW is not cleared.
When this service mode is executed, a message
"REBOOTING..." is displayed on the Control Panel, and the
host machine is automatically restarted.
SRVC-DAT SERVICE DATA is cleared.
User data is not cleared.
HIST ACT-HIST Communication log is cleared.
ACC-HIST Each print log is cleared.
JAM-HIST JAM log is cleared.
ERR-HIST Error(E code) log is cleared.
PWD-CLEAR Password of the system administrator is cleared.
ALL The following data are cleared.
• USER DATA
• SERVICE DATA
• JOB ID
• Each log
• CLEAR DATE
USER DATA/ SERVICE DATA are reset to the default
location value.
Appropriate values for LOCAL / SIZE-LC needs to be preset
before executing of CLEAR -> ALL When this service mode
is executed without setting the appropriate values for LOCAL
/ SIZE-LC, factory default settings are continued to use.
When this service mode is executed, a message
"REBOOTING..." is displayed on the Control Panel, and the
host machine is automatically restarted.
■ MISC-R
COPIER > FUNCTION > MISC-R
Sub item Description
SCANLAMP Execution of lighting function for Scanning Lamp.
(CIS LED R -> G -> B -> W -> OFF)
FAX
Description
model
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Common to all
models
Yes
T-8-11
8-6
Other
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
T-8-10
8-6