Removing The Fax Ncu Pcb (Fax Model 120V/230V) (Duplex Model) - Canon i-SENSYS MF229dw Service Manual

4
Disassembly/Assembly > Controller System (Duplex Model) > Removing the FAX NCU PCB (Fax Model 120V/230V) (Duplex Model) > Procedure
■ After Replacing
1) After replacing the PCB, enter the serial number in "Location " of System Management
Settings from remote UI or local UI, and confirm the serial number.
2) Check that OK is displayed in COPIER > OPTION > SERIAL > SN-MAIN.
• For the detailed procedure, refer to the chapter on service mode.
3) COPIER > OPTION > BODY > LOCALE
To set country group.
1: Japan
2: North America
3: Korea
4: China
5: Taiwan
6: Europe
7: Asia
8: Oceania
Setting range: 1 - 8 (Service part default value: 2)
4) Execute the following service mode to enable this setting.
COPIER > FUNCTION > CLEAR > ALL
5) If the user has printed the user data list and saved the address book before the
replacement, ask the user to return the settings back to the original values.
• Ask the user to load the address book from remote UI.
1. Start remote UI and log in in administrator mode.
2. [Settings/Registration] > [Import/Export] > [Import]
3. Select the address book file to be imported, and click [Start Importing].
4. Click [OK].
4 Disassembly/Assembly > Controller System (Duplex Model) > Removing the FAX NCU PCB (Fax Model 120V/230V) (Duplex Model) > Procedure
Removing the FAX NCU PCB
(Fax Model 120V/230V) (Duplex Model)
■ Preparation
1) Remove the Left Cover (Duplex Model) (Refer to page 4-86).
■ Procedure
1) Remove the FAX NCU PCB [1].
• 1 Flat Cable [2]
• 1 Connector [3]
• 3 Screws [4]
2x
3x
[1] [4]
4-107
F-4-295
[2]
[3] [4]
F-4-296
4-107