Removing The Engine Controller Pcb (Simplex Model) - Canon i-SENSYS MF229dw Service Manual

4
Disassembly/Assembly > Controller System (Simplex Model) > Removing the Engine Controller PCB (Simplex Model) > Preparation
NOTE: How to assemble the Main Motor
Be sure to assemble it with the harness [1] routed upwards.
(Otherwise, the connector of the Speaker Harness cannot reach the Motor Driver PCB.)
[1]
4 Disassembly/Assembly > Controller System (Simplex Model) > Removing the Engine Controller PCB (Simplex Model) > Preparation

Removing the Engine Controller PCB (Simplex Model)

[1]
■ Preparation
1) Remove the Left Cover (Simplex Model) (Refer to page 4-144).
2-1) Remove the SADF Unit + Reader Unit (SADF Model) (Refer to page 4-51).
2-2) Remove the Copyboard Cover + Reader Unit (Copyboard Model) (Refer to page 4-76).
3) Remove the Right Cover (Simplex Model) (Refer to page 4-147).
4) Remove the Front Cover Unit (Simplex Model) (Refer to page 4-147).
5) Remove the Upper Cover (Simplex Model) (Refer to page 4-147).
6) Remove the Rear Cover (Simplex Model) (Refer to page 4-149).
F-4-452
7) Remove the Main Controller PCB (Simplex Model) (Refer to page 4-159).
8) Remove the FAX NCU PCB (FAX Model 120/230V) (Simplex Model) (Refer to page 4-161).
4-155
F-4-453
4-155