Removing The Speaker (Fax Model + Simplex Model) - Canon i-SENSYS MF229dw Service Manual

4
Disassembly/Assembly > Controller System (Simplex Model) > Removing the Speaker (Fax Model + Simplex Model) > Procedure
3) Pass the harness [1] through the hole [A] of the Left Side Plate to the inside.
• 1 Connector [2]
• 1 Connector [3] (Fax Model)
[A]
2x
[2]
[3]
4) Remove the Multi Pickup Sensor Unit [1].
• 1 Wire Saddle [2]
• 1 Claw [3]
• 3 Hooks [4]
[1]
1x
1x
[4]
[2]
4 Disassembly/Assembly > Controller System (Simplex Model) > Removing the Speaker (Fax Model + Simplex Model) > Procedure
[A]
[1]
F-4-496
[3]
[4]
[3]
[4]
[4]
F-4-497

Removing the Speaker (Fax Model + Simplex Model)

■ Preparation
1) Remove the Left Cover (Simplex Model) (Refer to page 4-144).
2) Remove the Right Cover (Simplex Model) (Refer to page 4-147).
3) Remove the Front Cover Unit (Simplex Model) (Refer to page 4-147).
■ Procedure
1) Disconnect the Speaker Harness [1], and pass it through the hole [A] of the Left Side Plate
to the inside.
• 1 Connector [2]
• 1 Wire Saddle [3]
1x
1x
[3]
[A]
[1]
[2]
4-169
F-4-498
[A] [1]
F-4-499
4-169