Removing The Copyboard Glass (Copyboard Model) - Canon i-SENSYS MF229dw Service Manual

4
Disassembly/Assembly > Original Exposure/Feed System (Copyboard Model) > Removing the Copyboard Glass (Copyboard Model) > Procedure
NOTE:
The following shows how to route the harness.
4 Disassembly/Assembly > Original Exposure/Feed System (Copyboard Model) > Removing the Copyboard Glass (Copyboard Model) > Procedure

Removing the Copyboard Glass (Copyboard Model)

■ Preparation
1) Remove the Copyboard Cover (Refer to page 4-75).
■ Procedure
CAUTION:
F-4-196
• Be sure to place the removed Copyboard Glass on a cloth, etc. to avoid damaging
the bottom sheet.
• When removing the Copyboard Glass, be careful not to touch the glass surface.
• If the surface becomes dirty, clean it with lint free paper.
4-78
F-4-197
F-4-198
4-78