Removing The Pickup Solenoid (Simplex Model) - Canon i-SENSYS MF229dw Service Manual

4
Disassembly/Assembly > Pickup Feed System (Simplex Model) > Removing the Pickup Solenoid (Simplex Model) > Procedure

Removing the Pickup Solenoid (Simplex Model)

■ Preparation
1) Remove the Left Cover (Simplex Model) (Refer to page 4-144).
2-1) Remove the SADF Unit + Reader Unit (SADF Model) (Refer to page 4-51).
2-2) Remove the Copyboard Cover + Reader Unit (Copyboard Model) (Refer to page 4-76).
3) Remove the Right Cover (Simplex Model) (Refer to page 4-147).
4) Remove the Front Cover Unit (Simplex Model) (Refer to page 4-147).
5) Remove the Upper Cover (Simplex Model) (Refer to page 4-147).
6) Remove the Rear Cover (Simplex Model) (Refer to page 4-149).
7) Remove the Main Controller PCB (Simplex Model) (Refer to page 4-159).
8) Remove the FAX NCU PCB (FAX Model 120/230V) (Simplex Model) (Refer to page 4-161).
4 Disassembly/Assembly > Pickup Feed System (Simplex Model) > Removing the Pickup Solenoid (Simplex Model) > Procedure
F-4-561
■ Procedure
1) Remove the Wireless LAN Unit [1] (Wifi Model).
• 1 Screw (black TP) [2]
• 2 Hooks [3]
[1]
1x
[3]
[2]
2) Remove the Main Controller PCB Installation Plate [1].
• 1 Wire Saddle [2]
• 4 Screws (with washer) [3]
• 2 Screws (black TP) [4]
1x
6x
[4]
4-190
[3]
F-4-562
[1]
[2]
[3]
F-4-563
4-190