Removing The Main Fan (Duplex Model) - Canon i-SENSYS MF229dw Service Manual

4
Disassembly/Assembly > Controller System (Duplex Model) > Removing the Main Fan (Duplex Model) > Procedure
9) Remove the Main Motor [1].
• 2 Screws (with plain washer) [2]
2x
NOTE: How to assemble the Main Motor
Be sure to assemble it with the harness [1] routed upwards.
(Otherwise, the connector of the Speaker Harness cannot reach the Motor Driver PCB.)
[1]
4 Disassembly/Assembly > Controller System (Duplex Model) > Removing the Main Fan (Duplex Model) > Procedure
[1] [2]
F-4-259
[1]

Removing the Main Fan (Duplex Model)

■ Preparation
1) Remove the Left Cover (Duplex Model) (Refer to page 4-86).
2-1) Remove the DADF Unit + Reader Unit (DADF Model) (Refer to page 4-27).
2-2) Remove the SADF Unit + Reader Unit (SADF Model) (Refer to page 4-51).
2-3) Remove the Copyboard Cover + Reader Unit (Copyboard Model) (Refer to page 4-76).
3) Remove the Right Cover (Duplex Model) (Refer to page 4-87).
4) Remove the Front Cover Unit (Duplex Model) (Refer to page 4-89).
5) Remove the Upper Cover Unit (Duplex Model) (Refer to page 4-89).
■ Procedure
1) Remove the Scanner Cover [1].
• 2 Screws (black TP) [2]
2x
F-4-260
F-4-261
[2]
[1]
F-4-262
4-97
4-97