Operating With The Operation Panel - 2; Example To Change From Forward Run To Reverse Run During Operation; Canceling The Rotation Direction Setting - Panasonic AAD03011 Instruction Manual

Operating With the Operation Panel -2
Forward / reverse run function: Forward run/reverse run operation (Parameter P08=1)
Frequency setting: Digital setting (Parameter P09=0)
[Example for rotating in forward direction at operating frequency 5Hz]
Power ON
Frequency
setting
Forward run
setting
Current state (0: Stop, F: Forward run, r: Reverse run)
Set rotation direction (F: Forward run, r: Reverse run)
Run command

[Example to change from forward run to reverse run during operation]

Reverse run
setting
Run command
[Stopping operation]
Stop command
Note) If the RUN button is pressed after setting the rotation direction, the rotation
direction will not changed.

[Canceling the rotation direction setting]

After setting with the and buttons, the rotation direction can be canceled by pressing
the same button again.
28
The main display lamp will turn ON.
MODE
Press the MODE button.
Press the SET button.
SET
(The main display will flicker.)
Press the
to display 5Hz on the main display.
(The main display will flicker.)
SET
Press the SET button to set the data.
Press the (up) button, and set the
rotation direction to forward run.
(Press the button to set reverse run.)
Press the RUN button.
RUN
The motor will start rotating in the
forward direction and operate at 5Hz.
Press the (down) button, and set
the rotation direction to reverse run.
RUN
Press the RUN button.
The motor will gradually decelerate,
and will start forward rotation at
5Hz again.
Press the STOP button.
STOP
The motor will start to decelerate
and will stop.
(up) and (down) buttons
Current state (F: Forward run)
Set rotation direction (r: Reverse run)
Main display
0 0
F
0 0. 5
0 5. 0
0 0
0
5. 0
F
Forward 5. 0
0. 0
5. 0
Reverse
0 0
0
r
0
F
r
0