Sanyo SFX-110 Instruction Manual page 44

bEQ5!El
Use this mode if you want to receive both phone messages and faxes while you are away.
(Connect an answering machine to the SFX-110 through the line plug.)
When a call arrives:
1. The SFX-110 (and an extension telephone connected to the SFX-110 through the line
plug) rings according to the ring delay setting of your answering machine.
2. The line connects and your answering machine answers the call with
your greeting.
3A. The call is an Incoming fax
3B. The call is a phone call (or a manual
(by automatic transmission):
fax call):
The SFX-I 10 automatically
receives the fax after your
Your answering machine starts
greeting is played.
recording after the beep following
xx RECEIVING xx
your greeting. Callers can now leave
a message.
Advise your callers, in your
greeting, that a fax can be
received during or after the
greeting.
Example: If you are sending a
fax, start transmission now.
Or please leave a voice
message after the tone.
If no voice is heard for 6 seconds after the beep following your greeting, the
SFX-110 automatically switches over to the fax receiving mode and sends a
fax tone to the caller.
The answering machine must be set the answer a call within 4 rings.
When the SFX-I 10 is set to ANSWER mode, there may be some difficulties in
remote message retrieval operation of the connected answering machine. If you
need to access the answering machine by remote, the SFX-1 10 must be set to
MANUAL mode.
42