Remote Reception - Sanyo SFX-110 Instruction Manual

Remote reception
.
The remote reception feature allows a fax reception after a telephone call is answered by an
extension telephone connected to the same line as the SFX-1 10/21 O.
This feature works with either series or parallel connection.
Series connection Parallel connection
Telephone line Telephone line
*~
Using the extension phone directly connected to the SFX-1 10/21 O (series connection):
The feature switch No. 08 (Remote receiving) must be set to ON. (The initial factory setting is
ON).
1. When an incoming call is raceived, lift the
handset of the extension phone.
2. Talk if it is a voice call. If it is a fax, then:
3. Enter [3] twice on the extension phone to activate a fax reception,
4. Replace the handset.
Remote reception activation number is initially set to 33.
To change this number, use the feature switch No. 08. (See pages 77-79.)
L
I!
Notes
For SFX-1 10, remote reception does not work when the reception mode is set to ANSWER
mode.
Remote reception may not function properly on certain telephones.
45