Sony DVS-9000 User Manual page 1024

4
5
Note
Only regions assigned here can be used for keyframe or snapshot recall.
To return the region assignment to the factory default state
In the Panel >Config >10 Key Region Assign menu, press [Default].
This returns the assignment of region selection buttons in the numeric keypad
control block to the factory default state.
To delete a region assignment
In step 3 of the procedure , make the selection to which the operation applies,
then press [Clear].
This clears the assignment of the selected region.
Setting the region selection buttons selected when the [ALL]
button is pressed
1
1024
Overall Control Panel Settings (Config Menu)
Knob Parameter
1 Button Assign Selection to which setting
Using any of the following methods, select the region to be assigned.
• Press directly on the list in the lower part of the right side.
• Press the arrow keys to scroll the reverse video cursor in the list in the
lower part of the right side.
• Turn the knob.
Knob Parameter
2 Region
Press [Set], to confirm the selection.
This assigns the region to the region selection button in the numeric
keypad control block.
In the Panel >Config >10 Key Region Assign menu, press [All Select] in
the button area, or the [All Select] button indication in the status area,
setting it to On.
The [All Select] button indication in the status area changes to orange, and
the system switches to a mode for assigning region selection buttons to the
[ALL] button. In the factory default state, all buttons appear in reverse
video, and are assigned to the [ALL] button.
Adjustment
applies
Adjustment
Region selection
Setting values
1 to 4
Setting values
1 and upwards