Shotbox - Sony DVS-9000 User Manual

Shotbox

The term "shotbox" refers to a function whereby for each specified region any
snapshot or keyframe effect can be recalled simultaneously.
The simultaneous recall setting data such as region names, snapshot numbers
and keyframe effect numbers are stored in "registers." There are 99 registers
for each control panel.
Register #1
M/E-1: Snapshot #1
User2: Effect #5
DME ch3: Effect #1
Auto Run: On
The previous figure shows schematically the settings in the 99 shotbox
registers.
Each register may contain any combination of the regions to which the register
applies, with the snapshots or effects to be recalled.
The Auto Run function is an attribute which can be set for each register. When
this is set to On, an effect recalled by a shotbox operation is automatically run.
• When register 1 is executed, this recalls M/E-1 snapshot 1, User2 effect 5,
• When register 3 is executed, M/E-1 effect 1, P/P effect 90, and User1 effect
822
Shotbox
Register #2
M/E-1: Snapshot #1
DME ch1: Snapshot #15
GPI: Effect #1
Auto Run: Off
Shotbox registers
and DME ch3 effect 1. For register 1, auto run is On, and therefore the User2
and DME ch3 effects are run as soon as they have been recalled.
1 are recalled. For register 3, auto run is off, and therefore to run the recalled
effects, press the [RUN] button in the keyframe control block.
Register #3
M/E-1: Effect #1
P/P: Effect #90
User1: Effect #1
Auto Run: Off
Register #99
P/P: Effect #2
DME ch1: Snapshot #1
Auto Run: On