Sony DVS-9000 User Manual page 604

Knob
2
3
4
To make the tip of the swirl stardust
1
2
To set the center position of the swirl
1
2
Melt settings
You can set the degree of transition, the degree of extension in the image, the
jaggedness of the melting sections, and the amplitude, frequency, amount of
movement, and speed of the melting sections. You can also set the slant of the
borders, the shape of the sections that begin to melt, and other parameters.
To apply the Melt effect
With the Melt menu displayed, use the following procedure.
1
2
604
DME Special Effect Operations
Parameter Adjustment
Center Amount of rotation in center of swirl –8.000 to +8.000
Outer Amount of rotation outside of Area
Area Region of swirl
Press [Pixel], turning it on.
Set the following parameters.
Knob Parameter Adjustment
1 Density Degree to which image
disappears
2 Random Trail type and amount of stardust 0.00 to 100.00
Press [Position], turning it on.
Set the following parameters.
Knob Parameter Adjustment
1 H Horizontal center position of swirl –8.000 to +8.000
2 V Vertical center position of swirl
In the <Direction> group, select the direction in which the image melts
away.
Up: Melting occurs upward.
Down: Melting occurs downward.
To make transition settings, press [Transition] and set the following
parameters.
Setting values
–8.000 to +8.000
0.00 to 100.00
Setting values
0.00 to 100.00
Setting values
–6.000 to +6.000