Knob
Parameter
2
Soft
3
Pattern
a) The patterns are the same as standard wipes. (For details, see "Wipe Pattern List" in (page
447).)
To select the pattern, display the Mix Pattern Select menu by pressing
[Mix Pattern] in the edge fill Matte Adjust menu. After selecting one of the
patterns (standard wipe patterns 1 to 24) displayed in the Mix Pattern
Select menu, you can adjust the following parameters.
Knob
Parameter
1
Size
2
Soft
4
Adjust color 1 and color 2.
To adjust color 1 press [Color 1], and to adjust color 2 press [Color 2],
turning it on respectively, and adjust the following parameters.
Knob
Parameter
1
Luminance
2
Saturation
3
Hue
5
If required, set the pattern modifiers.
• When turning [Position] on and setting the pattern position
Knob
Parameter
1
Position H
2
Position V
a) See page 280.
• When turning [Multi] on and replicating the pattern
Knob
Parameter
1
H Multi
2
V Multi
3
Invert Type
a) See page 285.
Adjustment
Softness of pattern edge
Pattern number
Adjustment
Pattern size
Softness of pattern edge
Adjustment
Luminance
Saturation
Hue
Adjustment
Horizontal position
Vertical position
Adjustment
Number of repetitions of pattern
horizontally
Number of repetitions of pattern
vertically
Replication layout
Key Setting Operations Using Menus
Setting values
0.00 to 100.00
a)
1 to 24
Setting values
0.00 to 100.00
0.00 to 100.00
Setting values
0.00 to 100.00
0.00 to 100.00
359.99 to 0.00
Setting values
a)
–200.00 to +200.00
a)
–200.00 to +200.00
Setting values
1 to 63
1 to 63
a)
1 to 4
227