Sony DVS-9000 User Manual page 618

Frame: freeze in frame units.
Field: freeze in field units.
Erasing the afterimages that remain in memory whenever a
keyframe is passed
Press [KF Strobe Eraser], turning it on.
When the effect passes a keyframe, the afterimage is erased before writing a
new afterimage.
Applying stardust to the afterimage portion
The afterimage portion becomes stardust, and gradually disappears.
1
2
Disabling the keyframe strobe afterimage
Press [KF Strobe Disable], turning it on.
If you turn this function on when creating a keyframe, even as the effect passes
a keyframe, no afterimage remains.
Setting a combine process
Select whether to add the Keyframe Strobe effect before or after the combine.
Notes
• The combine process function is not supported on the MVE-8000A.
• When you change the selection in the <Combine Process> group, the
• When you do not combine images, the Keyframe Strobe effect only is
618
DME Special Effect Operations
Press the [DUST] button, turning it on.
Set the following parameters.
Knob Parameter
1 KF Strobe
Dust
2 Dust Soft
3 Dust Size
4 Dust Aspect
a) The way in which the afterimage disappears is affected by both the Decay and KF Strobe
Dust parameter adjustments for the keyframe strobe.
afterimages which had been added up to then disappear.
applied, regardless of the selection in the <Combine Process> group.
Adjustment
Amount of the afterimage
a)
disappearing as stardust
Timing with which stardust
disappears
Size of stardust
Aspect ratio of stardust
Setting values
0.00 to 100.00
0.00 to 100.00
0.00 to 100.00
–100.00 to +100.00