Sony DVS-9000 User Manual page 600

Knob
3
4
Page Turn settings
There are four modes: H&V, H, V, and Off. You can select the turn position,
the radius of the turned portion, the amount and angle of turning, and the input
video for the front and back pages.
To apply the Page Turn effect
With the Page Turn menu displayed, use the following procedure.
1
2
To set the input signal of the back page
1
600
DME Special Effect Operations
Parameter Adjustment
Position H Horizontal curve center position
Position V Vertical curve center position
In the <Split Mode> group, select the split mode.
H&V: The image turns as it is split from the center into 4 parts: left, right,
upper, lower.
H: The image turns as it is split from the center into 2 parts: left, right.
V: The image turns as it is split from the center into 2 parts: upper, lower.
When nothing is selected (Off): There are no splits and the image turns
from the edge.
Press [Page Turn], then set the following parameters.
Knob Parameter Adjustment
1 Radius Radius of turn part
2 Offset Amount of turn
3 Angle Angle of turn
a) When split mode is H&V
b) When split mode is H
c) When split mode is V
d) When split mode is off
In the <Back Video> group, select the signal input into the back page.
Self: Use the same signal as the front page.
Flat: Use a flat color.
Hue Rotation: Gradually vary the hue.
Setting values
–4.000 to +4.000
–3.000 to +3.000
Setting values
0.00 to 100.00
–100.00 to +100.00
a)
–0.250 to +0.000
b)
–0.250 to +0.250
c)
–0.500 to +0.000
d)
–8.000 to +8.000