Beveled Edge Settings - Sony DVS-9000 User Manual

Parameter
H
4
To soften the edges of the image, press [Edge Soft], turning it on, and set
the following parameter.
Knob
1
Note
Edges cannot be softened when the Crop effect is disabled.
To specify whether to invert the crop area when inverting the video
image
In the <Invert/Crop Process> group, select either of the following.
Crop –> Invert: Set an axis of symmetry at the center of the input video, and
invert both the desired area of video and the crop area horizontally and
vertically around that axis of symmetry. The order of effect application is
Crop > Invert.
Invert –> Crop: Set an axis of symmetry at the center of the input video, and
invert only the desired area of video horizontally and vertically around that
axis of symmetry. The order of effect application is Invert > Crop.

Beveled Edge Settings

Applying a beveled edge
1
In the DME menu, select VF1 'Edge' and HF2 'Beveled Edge.'
The Beveled Edge menu appears.
2
Press [Beveled Edge], turning it on.
This enables the beveled edge, and you can now use the knobs to adjust the
parameters.
Note
When the border is enabled, the edge soft function (see page 535) is not
available.
Entered value
1.5
–1.5
Parameter Adjustment
Soft Softness of edges
Setting
Left=–1.50
Right=1.50
Left=–1.50
Right=1.50
Setting values
0.00 to 100.00
DME Special Effect Operations
537