Sony DVS-9000 User Manual page 150

• To display the source names of the key signals assigned to buttons, hold
When using the AUX panel-less function (see page 145) with the CCP-6224/
6324 Control Panel, you can use the cross-point control block as an AUX bus
control block with the [AUX CTRL] button.
In this case, use the key 1 row as AUX delegation buttons, and the key 2 row
as AUX bus cross-point selection buttons; the source name displays show the
bus names and source names.
Colors of lit cross-point buttons
In a particular row of cross-point buttons, only the last pressed button is
effective, and lights amber or red. The amber indicates the "low tally" state,
and the red indicates the "high tally" state, to indicate whether or not the
selected signal appears in the final output video.
Color
Amber
Red
150
Signal Selection
down the [SPLIT] button in the key control block or the [KEY] button in the
auxiliary bus control block.
Significance of colors of lit cross-point buttons
State
Low tally
High tally
Significance
Does not appear in final output video
Appears in final output video