Motorola PTP 250 User Manual page 119

PTP 250 User Guide
Chapter 5: Installation
This chapter describes how to install the PTP 250 hardware,
To install the equipment at each PTP 250 link end, perform these tasks:
•
Preparing for installation
proceeding with the installation.
•
Installing the ODU
connectorized) on the supporting structure.
•
Installing connectorized antennas
antenna(s) (only required for connectorized ODUs).
•
Installing the drop cable and LPU
from the ODU to the LPU and PoE power supply, and to provide grounding for the
installation.
•
Installing the PoE power supply
supply and connect it to the ODU and network cables.
phn-2182_003v004 (Oct 2011)
on page 5-2 describes the checks to be performed before
on page 5-4 describes how to install the ODU (integrated or
on page
on page
on page
UNDER DEVELOPMENT
5-8 describes how to install separate
5-15 describes how to install the drop cable
5-29 describes how to install the PoE power
5-1