Table of Contents
Advertisement
Upgrading firmware version
Upgrading firmware version
Perform this task to ensure that the latest firmware version is installed on the unit.
This task consists of the following procedures:
•
Checking the installed firmware version
•
Uploading a new firmware version
Ensure that the correct units are upgraded, as units cannot easily be downgraded
afterwards.
If the link is operational, ensure that the remote end of the link is upgraded first using the
wireless connection, and then the local end can be upgraded. Otherwise, the remote end
may not be accessible.
Checking the installed firmware version
To check that the latest firmware version is installed, proceed as follows:
1
Select menu option Status. The System Status page is displayed. The Version
attribute near the top left is the installed firmware version
2
Go to
updates. Check that the latest available firmware version (for example 250-04-01)
is the same as the one already installed.
3
If the unit needs to be upgraded to the latest firmware version, perform
the system configuration
page 6-11.
Figure 6-10 Firmware Version in System Status page
6-10
http://www.motorola.com/ptp/support
on page
UNDER DEVELOPMENT
Chapter 6: Configuration and alignment
on page
6-10
on page
6-11
and find Point-to-Point software
6-35
and
Uploading a new firmware version
(Figure
6-10).
phn-2182_003v004 (Oct 2011)
Saving
on
Advertisement
Table of Contents
