Table of Contents
Advertisement
Ordering components
Item
N type male connectors
Self-amalgamating and PVC tape
Cable grounding kits
Lightning arrestor
FCC approved antennas
For connectorized units operating in the USA or Canada, choose external antennas from
Table 2-12
(5.4 GHz) or
the product and are constrained by the following limits for single- or dual-polarization
parabolic dish antennas:
•
5.4 GHz - up to 27 dBi per polarization or antenna.
•
5.8 GHz - up to 37.6 dBi per polarization or antenna.
Antennas not included in these tables are strictly prohibited for use with the PTP 250 in
the specified bands.
2-30
Table 2-13
(5.8 GHz). These are approved by the FCC for use with
UNDER DEVELOPMENT
Chapter 2: Planning considerations
Notes
For connecting the RF cables to the ODU. Two
connectors required per ODU. Use
weatherproof connectors, preferably ones that
are supplied with adhesive lined heat shrink
sleeves that are fitted over the
cable/connector interface.
'RF CONNECTOR,N,MALE,STRAIGHT FOR
CNT-400 CABLE'. Motorola part number
09010091001.
For the antenna end of the RF cable, refer to
the antenna manufacturer's instructions.
To weatherproof the RF connectors.
One kit is required per antenna cable
grounding point.
Refer to
Table 2-10
for specifications and part
numbers.
For protecting the antenna cable at building
entry, when the ODU is mounted indoors. One
required per antenna cable.
For example: Polyphaser LSXL-ME or LSXL.
phn-2182_003v004 (Oct 2011)
Advertisement
Table of Contents
