Table 7-4 System Status Lan Attributes - Motorola PTP 250 User Manual

Web-based management

Table 7-4 System Status LAN attributes

Attribute
IP Address
Network Mask
MAC Address
Link
Speed
Duplex
7-10
Meaning
Internet protocol (IP) address. The factory default is 169.254.1.1,
but it may be reset in the Installation Wizard; see
configuration on page 6-14.
Defines the address range of the connected IP network. The
factory default is 255.255.0.0, but it may be reset in the
Installation Wizard; see
MAC address of the Ethernet LAN port of this unit. This is not
user-configurable.
The current status of the Ethernet link. A state of 'Up' with a
green background indicates that an Ethernet link is established.
Any status on a yellow background indicates that the Ethernet
link is not established.
The negotiated speed (Mbps) of the Ethernet interface.
Indicates whether the unit is transmitting data in full duplex or
half duplex mode. Full duplex is expected in normal operation.
UNDER DEVELOPMENT
Step 1: LAN configuration
phn-2182_003v004 (Oct 2011)
Chapter 7: Operation
Step 1: LAN
on page 6-14.