Motorola APX 1000 Basic Service Manual page 217

Disassembly/Reassembly Procedures: Radio Disassembly
!
a u t i o n
!
a u t i o n
Figure 7-12. Unplug the connectors on the Front Kit Flex and Keypad Flex
Figure 7-11. Lift up the Main Board from the Chassis
When separating the small interconnects, care is needed to
avoid damage to the interconnect and surrounding on-board
components.
Place the Main Board on the anti-static mat or in a clean and
ESD safe area to avoid electrical damage to the electronics.
Replace the Thermal Pad (19) whenever the Main Board is
removed.
Keypad Flex Connector
Front Kit Flex Connector
7-9