Motorola APX 1000 Basic Service Manual page 445

Disassembly/Reassembly Procedures: Radio Disassembly 8-11
8.4.6.2 Removal of the Secondary Shield Assembly (44)
1. Remove the chassis screws (42) with Torx IP6 Bit as shown in Figure 8-12.
3
6
2
7
5
1
4
Figure 8-12. Remove the Chassis Screws
2. With the chassis screws removed, lift the Secondary Shield Assembly (44) out from the
Chassis (54) as shown in Figure 8-13.
Figure 8-13. Remove the Secondary Shield Assembly